GSI G-APDAM2B High Grade Sturdy Steel Articulating Full-Motion Dual Arm Wall TV Mount with Tilt and Swivel Functions – for Plasma/LCD/LED/TV/DVD/Combo/Blu-Ray Flat-Panel Monitors/Screens/Displays, Mounting Brackets Fits 32-Inch to 55-Inch Screens
GSI G-APDAM2B High Grade Sturdy Steel Articulating Full-Motion Dual Arm Wall TV Mount with Tilt and Swivel Functions – for Plasma/LCD/LED/TV/DVD/Combo/Blu-Ray Flat-Panel Monitors/Screens/Displays, Mounting Brackets Fits 32-Inch to 55-Inch Screens
 |
Brand: GSI Model : APDAM2B List Price : $149.99
|
GSI G-APDAM2B High Grade Sturdy Steel Articulating Full-Motion Dual Arm Wall TV Mount with Tilt and Swivel Functions – for Plasma/LCD/LED/TV/DVD/Combo/Blu-Ray Flat-Panel Monitors/Screens/Displays, Mounting Brackets Fits 32-Inch to 55-Inch Screens Feature
- Heavyweight 30 Lbs. of Pure Steel, High quality powder coat finish, Will hold TV Screens up to 165 Lbs.
- Dual Arms Extend To Over 2o Inches; and Fold To Less Than 5 Inches
- 120 Degree Swivel, +-15 Degree Tilt, Arm Extension/Collapsed Distance: Fully Extended: 21″
- Hole Pattern Coverage: Up To 6.7″ Horizontal by 19″ Vertical or VESA 100×100, 200×200, 300×300, 400×400 and 400×600
- Wall Plate Dimensions: 18.75 x 10.5″, Cable Management: 6.25 x 5″, TV Arm Dimensions: 19.75″ x 1.75″
GSI G-APDAM2B High Grade Sturdy Steel Articulating Full-Motion Dual Arm Wall TV Mount with Tilt and Swivel Functions – for Plasma/LCD/LED/TV/DVD/Combo/Blu-Ray Flat-Panel Monitors/Screens/Displays, Mounting Brackets Fits 32-Inch to 55-Inch Screens Overviews
The GSI G-APDAM2B is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20″ from the wall yet fold to less than 5″. Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55″ and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19″ wide and has wide slots making it easy to mount into standard 16″ studs even if they are not exactly 16″ apart. Thus, the arms may be visible on the sides of 32″ units. The universal design will fit any display with a hole pattern up to 26.3″ wide and 18″ tall. The wall plate is 1/8″ thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.
*** Product Information and Prices Stored:Jul 09, 2010 21:16:15
Available Get It Now!
Related : cheapest price sale silly bandz wholesale fuji_finepix_f11 nikon en el8 charger
