OLLO MOUNTS: 42-60″ Tilt / Tilting Flat Screen Universal TV Wall Mount *HDMI CABLE* *SUPER SAVER* LCD, Plasma, LED, Model (BT)
OLLO MOUNTS: 42-60″ Tilt / Tilting Flat Screen Universal TV Wall Mount *HDMI CABLE* *SUPER SAVER* LCD, Plasma, LED, Model (BT)
 |
Brand: OLLO Model : BT Customer Rating : List Price : $149.99
|
OLLO MOUNTS: 42-60″ Tilt / Tilting Flat Screen Universal TV Wall Mount *HDMI CABLE* *SUPER SAVER* LCD, Plasma, LED, Model (BT) Feature
- FREE HIGH SPEED HDMI CABLE INCLUDED IN THE BOX
- FREE MOUNTING HARDWARE
- NO ASSEMBLY REQUIRED
- +/-15º TILT
- VESA MOUNTING HOLES: Up To 800 X 400 (31.5″ HORIZONTAL X 15.75″ VERTICAL)
OLLO MOUNTS: 42-60″ Tilt / Tilting Flat Screen Universal TV Wall Mount *HDMI CABLE* *SUPER SAVER* LCD, Plasma, LED, Model (BT) Overviews
ENGINEERED SPECIFICALLY FOR LARGE FLAT SCREEN, THIS MOUNT HAS A UNIVERSAL VESA MOUNTING HOLE INTERFACE UP TO 800 X 400 (31.5″ HORIZONTAL X 15.75 ” VERTICAL). THE BODY AND ARMS ARE MADE FROM LASER CUT COLD -ROLLED HARDENED STEEL AND THEN FINISHED WITH A SUPER HARD POWDER COAT IN A PIANO BLACK FINISH. THE MODEL BT WILL RESIST CHIPPING AND DENTING FOR MANY YEARS OF TROUBLE FREE USAGE AND IS INDEPENDENTLY CERTIFIED TO RESIST DEFLECTION UP TO 165 LBS. TILT +/-15º. THIS MODEL BT IS PRE-ASSEMBLED AND COMES WITH ALL MOUNTING HARDWARE, 2 SAFETY SCREWS, FREE HIGH SPEED HDMI CABLE, AND OWNERS MANUAL. FREE SUPER SAVER SHIPPING.
OLLO MOUNTS: 42-60″ Tilt / Tilting Flat Screen Universal TV Wall Mount *HDMI CABLE* *SUPER SAVER* LCD, Plasma, LED, Model (BT) RelateItems
- Samsung 3D Starter Kit SSG-P2100T
- Samsung BD-C6900 1080p 3D Blu-ray Disc Player
- Samsung PN58C7000 58-Inch 1080p 3D Plasma HDTV (Black)
- Mediabridge Ultra Series – High Speed HDMI Cable – 15ft – Supports 3D Audio Return Channel
- CH Hanson 03040 STUD4SURE Magnetic Stud Finder
OLLO MOUNTS: 42-60″ Tilt / Tilting Flat Screen Universal TV Wall Mount *HDMI CABLE* *SUPER SAVER* LCD, Plasma, LED, Model (BT) CustomerReview
I just installed this TV mount on my 50′ Samsung PN50C550 weighing 83lbs. The mount I got said it was good for 30-62″ HDTV’s. Looks just like what is pictured. The instructions were pretty easy to follow and the parts are labeled. There is also a picture of each part in the instructions in case you mix them up. This structure is very sturdy. It was able to support my weight (130lbs). The metal is not flimsy and will not easily bend. The built in level is not really accurate so use your own level. FYI Hanging this mount and hanging your TV will be a 2-3 person job. Instructions are mostly in metric. There is just enough room behind so you won’t need to buy the hdmi elbow connectors. I am very happy with the look and stability of this mount! br /br /Some installation tips for wood studs:br /br /Tools needed:br /3/16″ drill bitbr /Tape measurebr /Stud finderbr /Painters tapebr /13mm wrench or socket wrenchbr /Levelbr /Phillips screwdriverbr /br /Find the center of where you want to Hang your TV. (When marking the vertical center put a small piece of painters tape below where the TV will hang so when you go to hang the TV you know where the center is.) Then locate the nearest studs on the left and right of the center. Use the stud finder and mark the center of each stud. br /br /Have a friend hold up the mount frame and use a level (not the built in one) to ensure it is straight. Your center mark should be around the center of the mount frame. If you have a bigger TV you have more room to adjust left to right if you need to. Mark the 4 mount holes (left right top bottom) so they are directly over the stud center marks. br /br /Next you need to drill the holes into the studs. The only complaint I have is the measurements are in metric and the instructions do not list the conversion. To install this into wood studs it asks you to use a 5 mm drill bit and make a 50mm hole. I used a 3/16″ drill bit and drilled a 2 inch deep hole. A trick to make all your holes the same depth … put a piece of blue painters tape around the drill bit just above the 2 inch mark. Then just drill each to the mark. br /br /Have your friend hold up the frame again. Then install the bolts + washer into the drilled holes. Do not over tighten! br /br /Determine which screws to use on your tv. For my Samsung TV I had to put the square washer on the backside of the mount arms because there were two screws sticking out of the back of the TV that were in the way. In the case the back of your tv is not even they provide plastic spacers you could use as well. Gently tighten the Tilt adjusters so they aren’t too loose.br /br /Once the mount arms are attached to the TV. You can hang it on the mount frame… Get your friend again and have them help you lift the TV onto the mount frame. If someone else is available have them plug in the cables before you hang it on the wall. Then reach underneath the TV and tighten the safety screws. It’s easier to do this if you gently tilt the TV up first. br /br /Yippe! Your TV is now ready to watch!br /
*** Product Information and Prices Stored:Sep 04, 2010 07:00:10
Available Get It Now!
Relate link : cheapest price sale
Recommend : wholesales.com nikon-coolpix-7900
